In the spraying project, the surface of the spray fan should be perpendicular to the surface of the coating. When the gun is manually operated, the width of each spray gun should not be too large. Otherwise, the coating will be uneven. The direction of the spray gun should always be parallel to the surface of the coating. Vertical to the spray fan to ensure uniformity of the coating. The operating speed of the gun should be stable, 300 ~ 400mm / s. The running speed is unstable, the coating thic
Two type powder coating booth compare No1 is PVC spraying booth . It is easy to clean, save time and labor; Convenient powder recovery in single-color operations . Robust, easy to maintain, simple to operate. This type is cost - effective and economic . No.2 is PP material powder coating booth . PP booth with the cyclone stytem, it is the fully automatic system . Improve productivity. Cyclone design offer great recovery efficiency. quick color change in 10-15m
In recent years, metal surface treatment technology has developed rapidly and has been widely used in many fields. In the surface treatment technology and engineering of powder coating equipment, pre-treatment occupies a very important position. It is not only indispensable as a "pre-treatment process" before surface treatment, but also closely related to the success or failure of subsequent surface treatment. Therefore, it is necessary to eliminate various oil stains (such as lubricating
+86-186 3213 8668
